TySOM-3-ZU7EV Embedded Prototyping Board

TySOM-3-ZU7 is a compact prototyping board containing Zynq® UltraScale+™ MPSoC device which provides 64-bit processor scalability while combining real-time control with soft and hard engines for graphics, video, waveform, and packet processing. Xilinx Zynq UltraScale+ ZU7EV-FFVC1156 MPSoC contains a Video Codec Unit which supports H.264/H.265, and also it has the biggest FPGA in the UltraScale+™ MPSoC family. This chip includes a Quad-core ARM Cortex-A53 as an Application Processing Unit, Dual-core ARM Cortex-R5 as a Real-Time Processing Unit and ARM Mali-400 MP2 as a Graphics Processing Unit. TySOM-3-ZU7 is designed to assure flexibility in selecting peripherals because of leveraging all the features of the Zynq UltraScale+ ZU7EV-FFVC1156 MPSoC chip. This prototyping board contains 4 Gb DDR4 Memory for the Programmable Logic (PL) and 8GB DDR4 SODIMM Memory for the Processing System (PS). This board includes 2 Gb NAND Memory and supports up to 32GB of SSD storage in Micro-SD card. Communication and networking is enabled by ×2 Gigabit Ethernet, Wi-Fi & Bluetooth, CAN, Pmod, 4× USB 3.0, USB to UART Bridge, SATA and QSFP+ connector. Multimedia interfaces are provided using DisplayPort, HDMI IN/OUT. To expand the peripherals, 2× FMC (1× HPC and 1× LPC) VITA 57.1-2010 compliant are provided on the board. Thus, additional devices can be connected as FMC Daughter Cards that are provided by Aldec and other vendors.

zynq ultrascale+ board BLOCK DIAGRAM

TySOM-3-ZU7EV Embedded Prototyping Board

Chipset / SoC

  • Xilinx Zynq UltraScale+ ZU7EV-FFVC1156 MPSoC
  • Quad-core ARM Cortex-A53 as an Application Processing Unit 
  • Dual-core ARM Cortex-R5 as a Real-Time Processing Unit
  • Video Codec Unit
  • 2x XADC - 12-bit, 1MSPS Analog to Digital converter
  • FPGA: ZU7EV
  • 504K Logic Cells, 460,800K Flip-Flops, 38Mb RAM, 1728 DSP

Connector Type for External Daughter Board

  • FMC HPC Standard Connector VITA 57.1-2010 compliant
  • FMC LPC (+5 GTH) standard connector VITA 57.1-2010 compliant

Memory

  • 4Gb RAM – DDR4 Programmable Logic
  • 8GB DDR4 SODIMM Memory for the Processing System
  • 2 Gb NAND Memory
  • Micro-SD support up to 32GB
  • 256Mb QSPI Flash Memory
  • 64 Kb EEPROM

Interfaces

  • 2× Gigabit Ethernet PHY DP83867CR
  • Wi-Fi/Bluetooth module (WL1837MOD)
  • 4x USB 3.0 ports 
  • SATA
  • CAN
  • QSFP+
  • Pmod connector
  • UART to USB bridge (CP2103) with Mini-USB B type connector
  • Xilinx JTAG Connector for Zynq PL

Multimedia

  • HDMI 2.0 Out - TE Connectivity 1888811-1
  • HDMI 2.0 IN - TE Connectivity 1888811-1
  • DisplayPort

Miscellaneous

  • 4x User Dip Switches
  • 6x User LEDs
  • Reset Pushbuttons for PL & PS
  • Accelerometer
  • Temperature Sensor
  • SYSMON
  • Current monitor

Dimensions

zynq ultrascale+ board



Printed version of site: support.aldec.com/en/products/emulation/tysom_boards/zynq_ultrascale_mpsoc/tysom_3_zu7ev