TySOM-3A Embedded Prototyping Board

TySOM-3A-ZU19EG is a compact SoC prototyping board featuring Zynq® UltraScale+™ MPSoC device which provides 64-bit processor scalability while combining real-time control with soft and hard engines for SoC prototyping solution, IP verification, graphics, video, packet processing and early software development. The main advantage of Xilinx Zynq Ultrascale+ ZU19EG-FFVB1517 MPSoC over other Zynq MPSoC devices is that it carries the largest FPGA in the Zynq® UltraScale+™ MPSoC family with over a million logic cells. It includes a quad-core ARM® Cortex-A53 platform running up to 1.5GHz. Combined with dual-core Cortex-R5 real-time processors, a Mali-400 MP2 graphics processing unit, and 16nm FinFET+ programmable logic, EG devices have the specialized processing elements needed to excel in next-generation wired and 5G wireless infrastructure, cloud computing, and Aerospace and Defense applications.

 

TySOM-3A-ZU19EG is designed to assure flexibility in selecting peripherals because of leveraging all the features of the Zynq UltraScale+ ZU19EG- FFVB1517 MPSoC chip. This prototyping board contains 8GB DDR4 Memory for the Programmable Logic (PL) and also 8GB DDR4 SODIMM Memory for the Processing System (PS). This board includes 2 Gb NAND Memory and supports up to 32GB of SSD storage in Micro-SD card. It also features a 512Mb QSPI Flash Memory. Communication and networking is enabled by ×2 Gigabit Ethernet, Wi-Fi & Bluetooth, CAN, Pmod, 4× USB 3.0, USB to UART Bridge, USB 2.0 OTG, JTAG USB, SATA, QSFP+ and PCIe x1 GEN3/4 connectors. Multimedia interfaces are provided using DisplayPort, HDMI IN/OUT. To expand the peripherals, 2× FMC VITA 57.1-2010 compliant are provided on the board. Thus, additional devices can be connected as FMC Daughter Cards that are provided by Aldec and other vendors.

BLOCK DIAGRAM

TySOM-3A Embedded Prototyping Board

Chipset / SoC

  • Xilinx Zynq UltraScale+ ZU19EG- FFVB1517 MPSoC
  • Quad-core ARM Cortex-A53 as an Application Processing Unit running up to 1.5GHz
  • Dual-core ARM Cortex-R5 as a Real-Time Processing Unit
  • Mali-400 MP2 graphics processing unit
  • 2x XADC - 12-bit, 1MSPS Analog to Digital converter
  • FPGA: ZU19EG
  • 1,143K Logic Cells, 1,045K Flip-Flops, 70.6Mb RAM, 1968 DSP

Memory

  • 8GB DDR4 SODIMM Memory for the Processing System and 8GB for PL
  • 2 Gb NAND Memory
  • Micro-SD support
  • 512Mb QSPI Flash Memory
  • 64 Kb EEPROM

Interfaces

  • 2× Gigabit Ethernet PHY DP83867CR
  • Wi-Fi/Bluetooth module (WL1837MOD)
  • PCIe x1 GEN3/4 (Root Complex or Endpoint)
  • 4x USB 3.0 ports
  • SATA
  • CAN
  • QSFP+
  • 2x8 IOs Pmod connector
  • USB 2.0 OTG (micro USB connector)
  • UART to USB bridge (CP2103) with Mini-USB B type connector
  • JTAG USB Module for Zynq PL

Multimedia

  • HDMI 2.0 Out
  • HDMI 2.0 IN
  • DisplayPort

Miscellaneous

  • 4x User Dip Switches
  • 5x User LEDs
  • Reset Pushbuttons for PL & PS
  • Accelerometer
  • Temperature Sensor
  • SYSMON
  • Curent monitor

Dimensions



Printed version of site: support.aldec.com/en/products/emulation/tysom_boards/zynq_ultrascale_mpsoc_boards/tysom_3a