What is the recommended power supply connector?
Solution
A standard 6-pin PCI-Express power connector should be used for powering the HES7 board. The PCI-Express connector should be connected to the CON1 connector on the HES7 board.
Aldec, Inc.
Corporate Headquarters
2260 Corporate Circle
Henderson, NV 89074 USA
Tel: +1 702 990 4400
Fax: +1 702 990 4414
https://www.aldec.com
©2025 Aldec, Inc.
Corporate Headquarters
2260 Corporate Circle
Henderson, NV 89074 USA
Tel: +1 702 990 4400
Fax: +1 702 990 4414
https://www.aldec.com
©2025 Aldec, Inc.
Printed version of site: support.aldec.com/en/support/resources/documentation/faq/1563