Which connector should I use for Spartan-6 chip programming?
Solution
The Aldec JTAG adapter connected to the 1x6 pin CON2 connector on the HES7 board should be used for Spartan-6 FPGA chip programming.
Aldec, Inc.
Corporate Headquarters
2260 Corporate Circle
Henderson, NV 89074 USA
Tel: +1 702 990 4400
Fax: +1 702 990 4414
https://www.aldec.com
©2024 Aldec, Inc.
Corporate Headquarters
2260 Corporate Circle
Henderson, NV 89074 USA
Tel: +1 702 990 4400
Fax: +1 702 990 4414
https://www.aldec.com
©2024 Aldec, Inc.
Printed version of site: support.aldec.com/en/support/resources/documentation/faq/1575