When initializing the simulation of a Verilog design in Riviera-PRO, the following errors are observed in the Console window:
Error: Design unit <name_of_unit> not found in searched libraries: <list_of_libraries> Error: E8005: Kernel process initialization failed. Error: Simulation initialization failed.
Users need to specify the location of the libraries that are being used during simulation. For example, if you are using Verilog libraries, you would specify the location of the libraries by doing the following:
Right-click the design in the Design Manager, and select Properties from the drop-down menu
Go to Simulation | SystemVerilog | Entries
In the Show entries for: field, select Libraries
Click on the yellow folder button to browse for the specific library
Click Apply and then OK
Use the -L switch in the asim/vsim command. For example:
vsim -work work -L unisim_ver top_level