FMC-INTF Interface Daughter Card

FMC-INTFドーターカードは、PCI Express、光ファイバ QSFP +、ギガビットイーサネット、USBなど、一般的に使用される周辺機器の優れた選択肢を提供します。特定のインタフェースがネイティブで使用できない場合、またはネイティブのものよりも他のFPGAに接続する必要がある場合は、メインFPGAボードの機能を拡張します。このボードの一般的なアプリケーションは、ASIC / SoCの物理プロトタイピング、ICE(In Circuit Emulation)、またはエンベデッドデザインの評価とプロトタイピングです。


FMC-INTF Interface Daughter Card

Components & Interfaces

  • PCIe x4 endpoint, MOLEX 75586-0007 cable connector and guide frame
  • QSFP+ 4 lanes, MOLEX connector 75586-0010 and shield
  • Gigabit Ethernet RJ45 connector and Marvell PHY 88E1116R with RGMII
  • USB 2.0 with multipurpose UART/FIFO device PHY FTDI FT2232H
  • UART/USB bridge Silicon Labs CP2103
  • 8x User LEDs, 5x Status LEDs
  • 8x User DIP Switches


  • 4 Gb NAND Flash
  • 2x 32 Mb SPI Flash
  • Micro SD card socket
  • 64 kB EEPROM (to accomplish ANSI/VITA 57.1 FMC standard)


  • 3x oscillators 100 MHz, 200 MHz, 156.25 MHz (reference for QSFP+)


  • Main board connector:
    • FPGA Mezzanine Card connector compliant with ANSI/VITA 57.1 FMC Standard
  • GPIO Connector (20 I/O)
    • 2x20 standard gold-pin 2.54 mm pitch connector
  • External I2C connector

Ask Us a Question
Ask Us a Question
Captcha ImageReload Captcha
Incorrect data entered.
Thank you! Your question has been submitted. Please allow 1-3 business days for someone to respond to your question.
Internal error occurred. Your question was not submitted. Please contact us using Feedback form.
We use cookies to ensure we give you the best user experience and to provide you with content we believe will be of relevance to you. If you continue to use our site, you consent to our use of cookies. A detailed overview on the use of cookies and other website information is located in our Privacy Policy.