Resources News Training Contact Sales Description Specification FMC-ADAS Automotive Daughter Card Top view Bottom view FMC-ADAS daughter card was designed to enable prototyping and evaluation of Automotive and Advanced Driver Assistance System designs with TySOM and HES main boards. It extends the base functionality of a given FPGA board by providing interfaces and peripherals for HSD cameras, RADAR, LIDAR and ultrasonic sensors that are the base of ADAS applications. For example 360° car vision or rear view camera applications and supporting algorithms can be evaluated with HSD cameras attached directly to the FPD-Link III Deserializer (Texas Instruments DS90UB914Q-Q1) on FMC-ADAS card. The daughter card uses a standard FMC-HPC connector for both signal I/O and power supply. It contains voltage regulator to support 5V devices and contains all required voltage level shifters to enable connection with FPGA I/O working at 1.8V. BLOCK DIAGRAM FMC-ADAS Automotive Daughter Card Components & Interfaces 5x FPD-Link III deserializer (DS90UB914Q-Q1) terminated with HSD camera connectors URM37 V4 module support with RS-232 transceiver (MAX3218) and 12-bit ADC (AD7998) for analog signal LIDAR-Lite V2 module interface with 5V voltage level shifters Buzzer 2x LVDS clock oscillators: 100 MHz, 200 MHz I2C interface with EEPROM for FMC configuration data 12x Status LEDs Connectivity Main board connector: FPGA Mezzanine Card connector compliant with ANSI/VITA 57.1 FMC Standard Peripherals connectors 5x HSD camera connectors Connector for ultrasonic sensor URM37 V4 standard goldpin 1x9, 2.54 mm pitch Connector for PulsedLight LIDAR-Lite_V2 standard goldpin 1x6, 2.54 mm pitch, 5V level shifters I2C connector standard goldpin 2x5, 2.54 mm pitch
